Fog Light Bulbs

When replacing, use the following bulbs.

Fog Light: 55 W (H11)

1. Remove the screw using a Phillips-head


1. Remove the screw using a Phillips-head screwdriver and carefully pull the fog light assembly out of the bumper.

2. Remove the coupler.


2. Remove the coupler.

It can be removed by pushing the tab.

3. Rotate the old bulb to the left to remove.

4. Insert a new bulb into the fog light assembly and turn it to the right.

5. Insert the coupler into the connector of the bulb.

NOTICE


Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

The fog lights are halogen bulbs.

When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

    See also:

    Audio System
    Audio System An audio system is standard on all models. Read the appropriate pages (as shown below) to use your vehicle’s audio system. ...

    Phone Setup
    This command group is available for paired cell phones. Phone pairing tips You cannot pair your phone while the vehicle is moving. Your phone must be in discovery or search mode to pair. Refe ...

    Features & Gadgets
    Among the many dizzying differences between trims are the electronic gadgets that come with each. You can't add a bigger or better stereo to a given trim as an option, you have to buy whatever tri ...