Changing the Wiper Blade Rubber

1. Lift the driver side wiper arm first, then the


1. Lift the driver side wiper arm first, then the passenger side.

2. Place a cloth on the edge of the lock tab.


2. Place a cloth on the edge of the lock tab.

Push the lock tab up with a flat-tip screw driver.

3. Slide the blade from the wiper arm.

NOTICE


Avoid dropping the wiper arm; it may damage the windshield.

4. Slide the wiper blade out from its holder by


4. Slide the wiper blade out from its holder by pulling the tabbed end out.

5. Remove the retainers from the rubber blade


5. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.

Correctly align the rubber protrusion and the retainer grooves.

6. Slide the new wiper blade onto the holder


6. Slide the new wiper blade onto the holder from the bottom end.

The tab on the blade should fit in the indent of the wiper blade.

7. Slide the wiper blade onto the wiper arm, then push down the lock tab.

8. Lower the passenger side wiper arm first, then the driver side.

    See also:

    2009 Honda Pilot review
    Remember when your mother told you that just because everyone else was doing something didn't mean you had to do it too? It appears Honda took that advice to heart, as the redesigned 2009 Pilot bu ...

    Steering Wheel Adjustment
    Make any steering wheel adjustment before you start driving. Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in ...

    Text Data Display Function
    Each time you press the TITLE button, the display shows you the text, if the disc was recorded with text data. You can see the album, artist, and track name in the display. If a disc is rec ...