What to Do After the Engine Starts

Once your vehicle's engine has started, remove the jumper cables in the following order.

1. Disconnect the jumper cable from your vehicle's ground.

2. Disconnect the other end of the jumper cable from the assisting vehicle's battery - terminal.

3. Disconnect the jumper cable from your vehicle's battery + terminal.

4. Disconnect the other end of the jumper cable from the assisting vehicle's battery + terminal.

Have your vehicle inspected by a nearby service station or a dealer.

    See also:

    Protecting Discs
    When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat. To clean a disc, ...

    USB Flash Memory Device Error Messages
    If you see an error message on the screen while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to yo ...

    2008 Honda Civic Review
    The three years since the Honda Civic was last redesigned have been plenty of time for the competition to catch up to Honda's solid, fuel-efficient, entertaining daily driver, but after revisiting ...