Releasing the Lock

1. Set the parking brake.


1. Set the parking brake.

2. Remove the key from the ignition switch.

3. Wrap a cloth around the tip of a small flattip screwdriver and remove the cover of the shift lock release slot.

Put the tip of the flat-tip screwdriver into the slot and remove it as shown in the image.

4. Insert the key into the shift lock release slot.


4. Insert the key into the shift lock release slot.

5. While pushing on the key, press the shift lever release button and place the shift lever into The lock is now released. Have the shift.


The lock is now released. Have the shift lever checked by a dealer as soon as possible.

    See also:

    Engine Speed Limiter
    If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused ...

    Engine Coolant Check
    Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see Adding Engine Coolant on page for information on add ...

    Coat Hook
    To use a coat hook, slide it out slightly, then pull it down. Make sure the coat hook is folded up when you are not using it. This hook is not designed for large or heavy items. ...