How to Handle Overheating

Overheating symptoms are as follows:

• The high temperature indicator comes on or the engine suddenly loses power.

• Steam is coming out of the engine compartment.

■ First thing to do

1. Immediately park the vehicle in a safe place.

Automatic transmission models

Move the shift lever to the parking brake. Turn off all accessories and set
the parking brake. Turn off all accessories and turn on the hazard warning lights.

Manual transmission models

Move the shift lever to the parking brake. Turn off all accessories and set
the parking brake. Turn off all accessories and turn on the hazard warning lights.

2. No steam coming out: Keep the engine running and open the hood.

Steam coming out: Turn off the engine and wait until steam goes away. Then, open the hood.

Steam and spray from an overheated


Steam and spray from an overheated engine can seriously scald you.

Do not open the hood if steam is coming out.

NOTICE

Continuing to drive with the high temperature indicator on may damage the engine.

■ Next thing to do

1. Check that the cooling fan is operating and


1. Check that the cooling fan is operating and stop the engine once the high temperature indicator goes off.

If the cooling fan is not operating, immediately stop the engine.

2. Once the engine has cooled down, inspect the coolant level and check the cooling system components for leaks.

If the coolant level in the reserve tank is low, add coolant until it reaches the MAX mark.

If there is no coolant in the reserve tank, check that the radiator is cool. Cover the radiator cap with a heavy cloth and open the cap. If necessary, add coolant up to the base of the filler neck, and put the cap back on.

Removing the radiator cap while the


Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.

Always let the engine and radiator cool down before removing the radiator cap.

If the coolant is leaking, contact a dealer for repairs.

Use water as an emergency/temporary measure only.

Have a dealer flush the system with proper antifreeze as soon as possible.

■ Last thing to do

Once the engine has cooled sufficiently, restart it and check the high temperature indicator.

If the high temperature indicator is off, resume driving. If it stays on, contact a dealer for repairs.

    See also:

    System Setup
    This command group allows you to change or customize HFL basic settings. To set a 4-digit passcode to lock the HFL system for security purposes: Press and release the HFL Talk button before ...

    Exterior
    In the past, the Civic was a very vanilla sedan, like many of its competitors. This latest generation, though, took a serious right turn at practical and went right to the sci-fi section. The hood ...

    Glossary of Tire Terminology
    Cold Tire Pressure – The tire air pressure when the vehicle has been parked for at least three hours or driven less than 1 mile (1.6 km). Load Rating – Means the maximum load that a tire is r ...