Connecting an iPod

1. Open the upper glove box.


1. Open the upper glove box.

2. Push the release button to release the USB adapter cable.

3. Connect your dock connector to


3. Connect your dock connector to the iPod correctly and securely.

4. Install the dock connector to the USB adapter cable securely.

If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times.

If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions online at www.apple.com/itunes/

    See also:

    Radio Theft Protection
    Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific code using the preset buttons (i ...

    Replacing Tires andWheels
    Replace your tires with radial tires of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). Mixing radial and bias-ply tires on ...

    Automatic transmission models - Shifting
    Change the shift position in accordance with your driving needs. ■ Shift lever positions You cannot turn the ignition switch to LOCK and remove the key unless the shift lever is in . T ...