Protecting Discs

When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat.

To clean a disc, use a clean soft cloth.

Wipe across the disc from the center to the outside edge.

A new disc may be rough on the inner and outer edges. The small plastic pieces causing this roughness can flake off and fall on the recording surface of the disc, causing skipping or other problems.

Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen.

Never try to insert foreign objects in the system or the magazine.

Handle a disc by its edges; never


Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc.

These, along with contamination from fingerprints, liquids, and felt-tip pens, can cause the disc to not play properly, or possibly jam in the drive.

    See also:

    Safety of Larger Children
    ■Protecting Larger Children The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and important precautions for a ch ...

    Load Capacity
    At 467 litres (VDA), the saloon's luggage capacity is best in class measured against other premium contenders. The boot loading height is also a convenient 678 mm, down 80 mm. Further practicality ...

    Parking
    Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline. Set the parking brake before you pu ...