Changing the Set Speed

You can increase the set cruising speed in any of these ways:

Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button.

To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle will speed up about 1 mph (1.6 km/h).

Push on the accelerator pedal.

Accelerate to the desired cruising speed, then press the SET/ DECEL button.

You can decrease the set cruising speed in any of these ways:

NOTE:

If you need to decrease your speed quickly, use the brakes as you normally would.

To slow down in very small amounts, tap the SET/DECEL button. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h).

Press and hold the SET/DECEL button. Release the button when you reach the desired speed.

Tap the brake pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel goes out. When the vehicle slows to the desired speed, press the SET/DECEL button.

Even with the cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed.

Resting your foot on the brake pedal causes cruise control to cancel.

    See also:

    Fluid Locations
    Fluid Locations ...

    Power Holds the Line
    The standard drivetrain changes for 2012 are minimal, at least on paper. The engine is a 1.8-liter four-cylinder, and both five-speed manual and automatic transmissions are offered. The Si gets th ...

    Voice Control System
    You can select the AUX mode by using the navigation system voice control buttons, but cannot operate the play mode functions. The specifications for compatible MP3 files are: Sampling freque ...