Phone Setup

This command group is available for paired cell phones.

Phone pairing tips

You cannot pair your phone while the vehicle is moving.

Your phone must be in discovery or search mode to pair. Refer to your phone’s manual.

Up to six phones can be paired.

Your phone’s battery may drain faster when it is paired to HFL.

If after three minutes your phone is not ready to pair or a phone is not found, the system will time out and return to idle.

To pair a cell phone:

1. Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. If it is not the first phone you are pairing, say ‘‘Phone setup’’ and say ‘‘Pair.’’

2. Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone.

3. When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step.

4. Follow the HFL prompts and name the newly paired phone.

To rename a paired phone:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’

2. Say ‘‘Edit

’’ after the prompts.

3. If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.

To delete a paired phone:

Press and release the HFL Talk button before a command.

1.Say ‘‘Phone setup

.’’ 2. Say ‘‘Delete’’ after the prompts.

3. HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.

To hear the names of all paired phones:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup

.’’ 2. Say ‘‘List

’’ after the prompts.

3. HFL will read out all the paired phone’s names.

    See also:

    Playing the AM/FM Radio
    The ST indicator appears on the display indicating stereo FM broadcasts. Stereo reproduction in AM is not available. You can store six AM stations and twelve FM stations into the preset button ...

    Fuel Recommendation
    Your vehicle is designed to operate on unleaded gasoline with a pump octane number of 87 or higher. Use of a lower octane gasoline can cause a persistent, heavy metallic rapping noise that c ...

    Replacing a Front Turn Signal Light Bulb
    1. Open the hood. To change the turn signal bulb on the driver’s side, remove the engine coolant reserve tank by pulling it out of its holder. 2. Remove the socket from the headlight a ...