Windshield Washers

Check the fluid level in the windshield washer reservoir at least monthly during normal use.

Check the fluid level by removing


Check the fluid level by removing the cap and looking at the level gauge.

On Canadian models: The low washer level indicator comes on when the level is low.

Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather.

When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on a clean cloth. This will help to condition the blade edges.

Do not use engine antif reeze or a


Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. Antif reeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid.

    See also:

    Removing and Reinstalling the Head Restraints
    Head restraints can be removed for cleaning or repair. To remove a head restraint: Pull the restraint up as far as it will go. Then push the release button, and pull the restraint up and out. T ...

    HFL Menus
    The ignition switch must be in ACCESSORY or ON to use HFL. To use HFL, you must first pair your Bluetoothcompatible cell phone to the system while the vehicle is parked. Some functions are ...

    Winter Driving
    Tires marked ‘‘M + S’’ or ‘‘All Season’’ on the sidewall have an allweather tread design suitable for most winter driving conditions. For the best performance in snowy or icy ...