Replacing a Front Turn Signal Light Bulb

1. Open the hood.


1. Open the hood.

To change the turn signal bulb on the driver’s side, remove the engine coolant reserve tank by pulling it out of its holder.

2. Remove the socket from the


2. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.

3. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms.

4. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.

5. Turn on the lights to make sure the new bulb is working.

6. (Driver’s side)
Reinstall the coolant reserve tank.

    See also:

    Carrying Cargo in the Passenger Compartment
    Store or secure all items that could be thrown around and hurt someone during a crash. Be sure items placed on the floor behind the front seats cannot roll underneath and interfere with the ...

    Emissions Controls
    The burning of gasoline in your vehicle’s engine produces several byproducts. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx), and hydrocarbons (HC). Gasoline evaporating fr ...

    Rear License Plate Light Bulb
    When replacing, use the following bulb. Rear License Plate Light: 5 W Models with trunk lid lining 1. Remove the screw from the center of the fastener using a Phillips-head screwdriver. 2. Rem ...