Installing a Child Seat with a Tether

A child seat with a tether can be


A child seat with a tether can be installed in any seating position in the back seat, using one of the anchorage points shown above.

Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available.

Using an Anchor

1. After properly securing the child


1. After properly securing the child seat, lift the head restraint, then route the tether strap over the seat-back and through the head restraint legs.

2. Lift the cover, then attach the tether strap hook to the anchor, making sure the strap is not twisted.

3. Tighten the strap according to the


3. Tighten the strap according to the seat maker’s instructions.

    See also:

    Interior
    Creative and expressive, roomy and practical - the 2012 Honda Civic interior is as impressive as the body design, while featuring a bold and advanced instrument layout that's unlike anything in th ...

    Wear Indicators
    The groove where the wear indicator is located is 1/16 inch (1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire. Worn out t ...

    Using the Paddle Shifters in the D position (D-Paddle Shift Mode)
    V6 models only When you are driving in theD position, you can shift the transmission up or down manually with the paddle shifters. To shift up or down, use the + (right) or - (left) paddl ...