Keys and Locks

The master key fits all the locks on


The master key fits all the locks on your vehicle. The valet key works only in the ignition and the driver’s door lock. You can keep the trunk release handle, and glove box locked when you leave your vehicle and the valet key at a parking facility.

You should have received a key number tag with your keys. You will need this key number if you ever have to get a lost key replaced. Use only Honda-approved key blanks.

These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged.

Protect the keys from direct sunlight, high temperature, and high humidity.

Do not drop the keys or set heavy objects on them.

Keep the keys away from liquids.

If they get wet, dry them immediately with a soft cloth.

The valet key does not contain a battery. Do not try to take it apart.

    See also:

    Brake System Indicator
    The brake system indicator normally comes on when you turn the ignition switch to the ON (II) position, and as a reminder to check the parking brake. It will stay on if you do not fully re ...

    Seat Adjustments
    LX and U.S. EX models See pages for important safety information and warnings about how to properly position the seats and seatbacks. Make all seat adjustments before you start driving. T ...

    VSA® On and Off
    This button is on the driver side control panel. To turn the VSA® system on and off, press and hold it until you hear a beep. VSA® will stop and the indicator will come on. To turn it on ag ...