Parking Brake

To apply the parking brake, pull the


To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever. The parking brake indicator on the instrument panel should go out when the parking brake is fully released.

Driving the vehicle with the parking


Driving the vehicle with the parking brake applied can damage the rear brakes and hubs. A beeper will sound if the vehicle is driven with the parking brake on.

    See also:

    Fog Light Bulbs
    When replacing, use the following bulbs. Fog Light: 55 W (H11) 1. Remove the screw using a Phillips-head screwdriver and carefully pull the fog light assembly out of the bumper. 2. Remove t ...

    Brake PadWear Indicators
    The front and rear disc brakes on all models have audible brake pad wear indicators. If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply ...

    Installing a Child Seat with a Lap/Shoulder Belt
    When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt. In addition, the lap/shoulder belts in all seating positions except ...