Using Cruise Control

1. Push the CRUISE button on the


1. Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on.

The cruise control systemcan be left on, even when it is not in use.

2. Accelerate to the desired cruising speed above 25 mph (40 km/h).

3. Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.

Cruise control may not hold the set speed when you are going up and down hills. If your vehicle speed increases going down a hill, use the brakes to slow down. This will cancel the cruise control. To resume the set speed, press the RES/ACCEL button.

The CRUISE CONTROL indicator on the instrument panel will come back on.

    See also:

    Maintenance Minder Messages on the Information Display
    To switch the display, press the (SEL/RESET) knob. Oil Life Display Explanation Information Maintenance Minder Indicator The engine oil life indicator starts to ap ...

    Safety
    Honda offers side curtain airbags with rollover sensors, front side-impact airbags, active front head restraints, an electronic stability system, antilock brakes and a tire pressure monitoring sys ...

    Rear License Plate Light Bulbs
    The license plate has two lights above it. The bulbs should be replaced by your dealer. ...