Phone Setup

This command group is available for paired cell phones.

Phone pairing tips

You cannot pair your phone while the vehicle is moving.

Your phone must be in discovery or search mode to pair. Refer to your phone’s manual.

Up to six phones can be paired.

Your phone’s battery may drain faster when it is paired to HFL.

If after three minutes your phone is not ready to pair or a phone is not found, the system will time out and return to idle.

To pair a cell phone:

1. Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. If it is not the first phone you are pairing, say ‘‘Phone setup

’’ and say ‘‘Pair

.’’

2. Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone.

3. When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step.

4. Follow the HFL prompts and name the newly paired phone.

To rename a paired phone:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’

2. Say ‘‘Edit

’’ after the prompts.

3.If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.

To delete a paired phone:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup

.’’

2. Say ‘‘Delete

’’ after the prompts.

3. HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.

To hear the names of all paired phones:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup

.’’ 2. Say ‘‘List

’’ after the prompts.

3. HFL will read out all the paired phone’s names.

To hear which paired phone is currently linked:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup.’’

2. Say ‘‘Status

’’ after the prompts.

3. HFL will tell you which phone is linked to the system.

To change from the currently linked phone to another paired phone:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup

.’’ 2. Say ‘‘Next phone

’’ after the prompts.

3. HFL disconnects the linked phone and searches for another paired phone.

4. Once another phone is found, it is linked to the system. HFL will inform you which phone is now linked.

If no other phones are found or paired, HFL will inform you that the original phone is linked again.

To change the pairing code setting:

Press and release the HFL Talk button before a command.

1. Say ‘‘Phone setup

.’’ 2. Say ‘‘Set pairing code

’’ after the prompts.

3. If you want HFL to create a random code each time you pair a phone, say ‘‘Random

.’’ If you want to choose your own 4-digit code to be used each time, say ‘‘Fixed

’’ and follow the HFL prompts.

    See also:

    Auxiliary Input Jack
    The auxiliary input jack is inside the console compartment. The system will accept auxiliary input from standard audio accessories using a 1/8 inch (3.5 mm) stereo miniplug. When you plug i ...

    Introduction
    One of the best ways to enhance the enjoyment of your new vehicle is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this own ...

    Traction
    The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified gov ...