Replacing a Front Side Marker Light Bulb

1. To change the bulb on the driver’s


1. To change the bulb on the driver’s side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger’s side, turn the steering wheel to the left.

2. Use a flat-tip screwdriver to remove the two holding clips from the inner fender.

3. Remove the socket from the


3. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.

4. Pull the burned out bulb straight out of its socket.

Push the new bulb straight into the socket until it bottoms.

5. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.

6. Turn on the lights to make sure the new bulb is working.

7. Reinstall the inner fender cover.

Then reinstall the holding clips, and lock them in place by pushing on their centers.

    See also:

    Automatic Lighting Off Feature
    This feature turns off the headlights, all other exterior lights, and the instrument panel lights within 15 seconds after you remove the key and close the driver’s door. The automatic light ...

    Carrying Cargo in the Cargo Area or on a Roof Rack
    Distribute cargo evenly on the floor of the cargo area, placing the heaviest items on the bottom and as far forward as possible. Tie down items that could be thrown about the vehicle during ...

    Voice Control System
    On vehicles with navigation system The climate control system for your vehicle can also be operated using the voice control system. See the navigation system manual for complete details. ...