Seat Belt Reminder

Your vehicle monitors front seat belt use. If


Your vehicle monitors front seat belt use. If the ignition switch is turned to ON before
before the driver's seat belt is fastened, a beeper will sound and the indicator will blink. If the driver does not fasten the belt before the beeper stops, the indicator will remain on.

The beeper will also periodically sound and the indicator will blink while driving until the driver's and front passenger’s seat belts are fastened.

The indicator will also come on if a front passenger does not fasten their seat belt within 6 seconds after the ignition switch is turned to ON When no one is sitting in the front passenger's seat,.


When no one is sitting in the front passenger's seat, or a child or small adult is riding there, the indicator will not come on.

This is because the weight sensors in the seat cannot detect their presence.

    See also:

    Cargo Net
    Optional The cargo net can be used to help hold down items stored in the trunk. ...

    Power Steering Fluid
    Check the level on the side of the reservoir when the engine is cold. The fluid should be between the UPPER LEVEL and LOWER LEVEL. If not, add power steering fluid to the UPPER LEVEL. Pou ...

    Checking the Clutch Fluid
    The fluid level should be between the MIN and MAX marks on the side of the reservoir. If the clutch fluid level is at or below the MIN mark, have a dealer inspect for leaks or an excessively wo ...