Adding Security with a Tether

A tether anchorage point is provided behind


A tether anchorage point is provided behind each rear seating position. A child seat that is installed with a seat belt and comes with a tether can use the tether for additional security.

1. Locate the appropriate tether anchorage


1. Locate the appropriate tether anchorage point and lift the cover.

2. Raise the head restraint to its highest position, then route the tether strap through the head restraint legs. Make sure the strap is not twisted.

3. Secure the tether strap hook onto the


3. Secure the tether strap hook onto the anchor.

4. Tighten the tether strap as instructed by the child seat manufacturer.

Since a tether can provide additional security to the lap/shoulder seat belt installation, we recommend using a tether whenever one is available.

    See also:

    Fuel Gauge
    This shows how much fuel you have. It may show slightly more or less than the actual amount. The needle returns to the bottom after you turn off the ignition. Avoid driving with an extremely ...

    The Luxury Problem
    Relative to a Toyota Camry or Nissan Altima, the Accord sedan feels high-rent. But Honda priced the Crosstour closer to luxury-brand cars, and there isn't enough that sets it apart from its modest ...

    Opening/Closing Windows without Auto-Open/Close Function
    To open: Push the switch down. To close: Pull the switch up. Release the switch when the window reaches the desired position. ...