Opening/Closing the Moonroof

You can only operate the moonroof when the ignition switch is in ON switch in the front of the ceiling to open and close the moonroof.. Use the
switch in the front of the ceiling to open and close the moonroof.

■ Automatic operation


■ Automatic operation

To open: Pull the switch back firmly, then release.

To close: Push the switch forward firmly, then release.

The moonroof will automatically open or close all the way. To stop the moonroof midway, touch the switch briefly.

■ Manual operation

To open: Pull the switch back, and hold it until the desired position is reached.

To close: Push the switch forward, and hold it until the desired position is reached.

■ Tilting the moonroof up

To tilt: Push on the center of the moonroof switch.

To close: Push the switch forward firmly, then release.

Opening or closing the moonroof on


Opening or closing the moonroof on someone's hands or fingers can cause serious injury.

Make sure all hands and fingers are clear of the moonroof before opening or closing it.

NOTICE

Opening the moonroof in below freezing temperature or when it is covered with snow or ice can damage the moonroof panel or motor.

The power moonroof can be operated for up to 10 minutes after you turn the ignition switch off.

Opening either front door cancels this function.

When resistance is detected, the auto reverse function causes the moonroof to change directions, then stop. Auto reverse stops sensing when the moonroof is almost closed to ensure that it fully closes. Make sure that all objects, including fingers, are clear of the moonroof.

    See also:

    To Play Bluetooth® Audio Files
    1. Make sure that your phone is paired and linked to HFL. 2. Press the AUX button. If the phone is not recognized, another HFLcompatible phone, which is not compatible for Bluetooth® Audio, ...

    To Create a Security PIN
    You can protect each of the six cell phones with a security PIN. 1. Press the PHONE button or the button. 2. Rotate to select Phone Setup, then press . Repeat the procedure to select Pa ...

    Chassis
    The suspension is a fully independent system with front MacPherson strut and rear multi-link with trailing arm designs that contribute to responsive driving characteristics for an SUV. The 109.2-i ...