Automatic Lighting Control

Automatic lighting control can be used when


Automatic lighting control can be used when the ignition switch is in ON When you turn the light switch to ,.


When you turn the light switch to the,
the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.

We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.

The light sensor is in the location shown below.

Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.

You can change the AUTO light sensitivity and


You can change the AUTO light sensitivity and automatic lighting off timer setting using the multiinformation display.

    See also:

    Driving Guidelines
    Your vehicle has higher ground clearance that allows you to travel over bumps, obstacles, and rough terrain. It also provides good visibility so you can anticipate problems earlier. Because ...

    Maximum Load Limit
    The maximum load for your vehicle is 850 lbs (385 kg). See Tire and Loading Information label attached to the driver's doorjamb. This figure includes the total weight of all occupants, cargo, and ...

    Traction
    The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified gov ...