Brightness Control

When the parking lights are turned on and the


When the parking lights are turned on and the ignition switch is in ON you can use the,
you can use the brightness control knob to adjust instrument panel brightness.

Brighten: Turn the knob to the right.

Dim: Turn the knob to the left.

You will hear the beeper when the brightness reaches minimum or maximum. The information display*/multi-information display* will return to its original state several seconds after you adjust the brightness.

■ Brightness level indicator


■ Brightness level indicator

The brightness level is shown on the information display*/multi-information display* while you are adjusting it.

Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.

Pressing the knob or the (SEL/RESET)
knob or the
(display/information) button* switches the display.
(display/information) button* switches the display.

If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the parking lights are on.

The brightness can be set differently for when the exterior lights are on, and when they are off.

    See also:

    Removing a PC Card
    To remove a PC card from the audio unit, fold back the screen by pressing the OPEN button. Press the eject button ( ) to remove the card. If you do not remove it from the slot, you cannot ...

    New i-DTEC and diesel auto transmission
    Honda's 2.2-litre i-DTEC diesel engine, which debuted in the latest Honda Accord in 2008, will be available in the new CR-V. The diesel produces 150PS at 4000 rpm (up 10PS) and torque of 350Nm at ...

    Steering Wheel Adjustments
    Make any steering wheel adjustments before you start driving. Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in ...