Seat Heaters

The ignition switch must be in ON


The ignition switch must be in ON to use
to use the seat heaters. The HI setting heats the seats faster than the LO setting.

There is no heater in the passenger's seatback due to the side airbag cutoff system.

While in HI, the heater cycles on and off.


While in HI, the heater cycles on and off.

The appropriate indicator will be on while the seat heater is on. Briefly press the switch on the opposite side to turn the heater off. The indicator will be off.

When a comfortable temperature is reached, select LO to keep the seat warm.

Heat induced burns are possible when


Heat induced burns are possible when using seat heaters.

Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.

Do not use the seat heaters even in LO when the engine is off. Under such conditions, the battery may be weakened, making the engine difficult to start.

In the LO setting, the heater runs continuously and does not automatically turn off.

    See also:

    Protecting CDs
    Follow these precautions when handling or storing CDs: • Store a CD in its case when it is not being played. • When wiping a CD, use a soft clean cloth from the center to the outside edge. • ...

    Playing a USB Flash Drive
    Your audio system reads and plays sound files on a USB flash drive in either MP3, WMA or AAC*1 format. Connect your USB flash drive to the USB adapter cable, then press the AUX button. ...

    Driver and Passenger Safety
    This section gives you important information about how to protect yourself and your passengers. It shows you how to use seat belts. It explains how your airbags work. And it tells you how to ...