USB Adapter Cable

1. Unclip the USB connector and loosen the


1. Unclip the USB connector and loosen the adapter cable.

2. Install the iPod® dock connector or the USB flash drive to the USB connector.

• Do not leave the iPod® or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it.

• Do not use an extension cable with the USB adapter cable.

• Do not connect the iPod® or USB flash drive using a hub.

• Do not use a device such as a card reader or hard disk drive, as the device or your files may be damaged.

• We recommend backing up your data before using the device in your vehicle.

• Displayed messages may vary depending on the device model and software version.

If the audio system does not recognize the iPod®, try reconnecting it a few times or reboot the device. To reboot, follow the manufacturer's instructions provided with the iPod® or visit www.apple.com/ ipod.

    See also:

    Carrying Cargo in the Trunk
    Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible. If you fold down the back seat, tie down items that could be thrown ...

    About Your Audio System
    On models with navigation system, see the Navigation System Manual for operation of the audio system, Bluetooth®HandsFreeLink®, and voice commands for these features. Models with information ...

    Coat Hook
    There is a coat hook on the rear left grab handle. Pull it down to use it. The coat hook is not designed for large or heavy items. ...