Auto Select (A.SEL)

Use the auto select feature to scan both bands and store the strongest station in each preset.

1. Press the SETUP button.

2. Press mode. to enter the auto select
mode.

The system goes into scan mode for several seconds.

To turn off auto select, press again. This restores the presets you originally set.
again. This restores the presets you originally set.

    See also:

    Automatic Transmission Fluid
    Specified fluid: Honda ATF DW-1 (automatic transmission fluid) Check the fluid level when the engine is at normal operating temperature. 1. Park on level ground, and start the engine. 2. Wait unt ...

    Locking/Unlocking the Doors Using a Key
    Fully insert the key and turn it. Models with remote transmitter When you lock the driver's door with a key, all of the other doors lock at the same time. When unlocking, the driver's door unl ...

    Turn Signal and Headlights
    1. Turn Signal 2. OFF 3. Parking and interior lights 4. AUTO 5. Headlights on 6. High Beams 7. Flash high beams *: If equipped Turn Signal - Push down on the lever to signal a left turn ...