CD Player

If a disc error occurs, you may see the following error messages.

Error Message

Cause

Solution

HEAT ERROR

High temperature ● Turn the audio system off and allow the player to cool down until the error message is cleared.
UNPLAYABLE/ Unsupported

Track/file format not supported ● Current track/file will be skipped. The next supported track/file plays automatically.
BAD DISC PLEASE CHECK OWNERS MANUAL PUSH EJECT

Mechanical error ● Press the button and remove the disc, and check that the(eject)
button and remove the disc, and check that the error message is cleared.

● Check that the disc is not damaged or deformed, and insert the disc again.

● If the error message reappears, press the the disc. button, and pull out
the disc.

● Insert a different disc.

If the new disc plays, there is a problem with the first disc.

● If the error message repeats, or the disc cannot be removed, contact a dealer.

Do not try to force the disc out of the player.

MECH ERROR

BAD DISC PLEASE CHECK OWNERS MANUAL

Servo error
CHECK DISC

Disc error ● Check that the disc is not damaged or deformed.
    See also:

    Important Maintenance Precautions
    If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead ...

    Body
    The 2012 Honda Pilot's new grille and front fascia replace the prior model's six-sided grille insert with a distinctive three-bar horizontal design. Reconfigured multi-reflector halogen headlights ...

    Brake System Indicator
    The brake system indicator normally comes on when you turn the ignition switch to the ON (II) position and as a reminder to check the parking brake. It will stay on if you do not fully r ...