To Clear the System

Security codes, paired phones, all stored voice tag, all speed dial entries, and all imported phonebook data are erased.

1. Press the PHONE button or the


1. Press the PHONE button or the button.
button.

2. Rotate then to select Phone Setup,
then press Repeat the procedure to select System.


Repeat the procedure to select System Clear.

3. Rotate press . to select Yes, then
press 4. You will receive a notification message on.


4. You will receive a notification message on the screen. Rotate then to select Yes,
then press 5. You will receive a confirmation message on.


5. You will receive a confirmation message on the screen. Press Automatic Import of Cellular Phonebook and Call History to finish.


    See also:

    Front Turn Signal/Parking/Side Marker Light Bulbs
    When replacing, use the following bulbs. Front Turn Signal/Parking/Side Marker Light: 28/8 W 1. Turn the steering wheel all the way to the opposite side from the light being replaced. Passenger ...

    Tire Pressure Monitoring System (TPMS) - Required Federal Explanation
    Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tir ...

    To Select a File from Folder and File Lists
    You can also select a folder or file by using the VOL/SELECT knob. Push the VOL/SELECT knob to switch the display to the folder or file list, then turn the VOL/SELECT knob to select a folder ...