Automatic transmission models - Shift Lever Operation

NOTICE


NOTICE

When you change the shift lever from and to
vice versa, come to a complete stop and keep the and
vice versa, come to a complete stop and keep the brake pedal depressed.

Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission.

Use the shift lever position indicator to check the lever position before pulling away.

Whichever position the shift lever is in when driving, a blinking indicates a transmission indicator
indicates a transmission problem.

Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible.

The fuel supply may be cut off if you drive at engine speeds in or over the tachometer red zone (engine speed limit). If this happens, you may experience a slight jolt.

It may not be possible to operate the shift lever if the brake pedal is applied while the shift lever release button is held down.

Depress the brake pedal first.

    See also:

    Braking System Design
    The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake, etc.). ...

    Safety
    The Honda Civic received top scores in front-, side- and rear-impact crash tests by the Insurance Institute for Highway Safety. Usually cars that achieve such a feat earn the organization's Top Sa ...

    Operating the XM Radio
    To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or the ON (II) position. Push the power/volume knob to turn on the audio system, and press the CD/XM button. Adjust the v ...